別瞎選富美家HPL！6種常規厚度實測，甲方指定款+場景適配全解析Don't blindly choose Fumijia HPL! 6 types of conventional thickness measurements, specified by Party A and fully analyzed for scene adaptation富美家HPL（學名為熱固性樹脂浸漬紙高壓層積板），俗稱防火皮，是裝修中應用廣泛的高性能裝飾耐火材料，其厚度選擇直接影響施工效果、使用場景及成本控制。據裝修建材行業數據顯示，75%的裝修從業者在選擇富美家HPL時，存在厚度選型不當?shù)膯?wèn)題，導致后期返工率高達32%，要么適配性不足，要么造成成本浪費。很多人不清楚富美家HPL的厚度規格、選型邏輯，甚至混淆HPL與同類加厚板材的區別。今天，結合實測經驗，詳解富美家HPL的常規厚度、材質原理及場景適配，幫大家精準選型、避開誤區。

　　Fumeijia HPL (thermosetting resin impregnated paper high-pressure laminated board), commonly known as fireproof skin, is a high-performance decorative refractory material widely used in decoration. Its thickness selection directly affects the construction effect, usage scenarios, and cost control. According to data from the decoration and building materials industry, 75% of decoration practitioners have the problem of improper thickness selection when choosing Fumijia HPL, resulting in a rework rate of up to 32% in the later stage, either due to insufficient adaptability or cost waste. Many people are not clear about the thickness specifications and selection logic of Fumijia HPL, and even confuse the difference between HPL and similar thickened boards. Today, based on practical experience, we will explain in detail the conventional thickness, material principles, and scene adaptation of Fumijia HPL, helping everyone to accurately select and avoid misunderstandings.

　　首先要明確，富美家HPL的厚度并非隨意設定，核心取決于芯紙（牛皮紙）的張數與單張厚度。作為高壓層積板材，富美家HPL以酚醛樹脂浸漬的牛皮紙為芯層，搭配三聚氰胺樹脂浸漬的表層紙與色紙，經高溫高壓壓制而成，芯紙的層數與厚度直接決定了成品HPL的厚度與硬度，這也是其區別于普通裝飾板材的核心工藝特點之一，確保了板材的耐用性與防火性能。

　　Firstly, it should be clarified that the thickness of Fumijia HPL is not arbitrarily set, and the core depends on the number of core paper (kraft paper) sheets and the thickness of each sheet. As a high-pressure laminated board, Fumijia HPL uses kraft paper impregnated with phenolic resin as the core layer, combined with melamine resin impregnated surface paper and colored paper, and is pressed under high temperature and high pressure. The number and thickness of the core paper directly determine the thickness and hardness of the finished HPL, which is also one of its core process characteristics that distinguish it from ordinary decorative boards, ensuring the durability and fire resistance of the board.

　　富美家HPL常規厚度主要有6種，分別為0.35mm、0.5mm、0.6mm、0.7mm、0.8mm、1.0mm，每種厚度的特性、適配場景差異顯著，需結合需求精準選擇。其中，0.35mm厚度的富美家HPL質地柔軟，韌性出色，最大優勢是可彎曲成型，適配弧形墻面、異形家具貼面等需要彎折的應用場景，其柔韌性遠超同類產品，經實測可實現半徑5cm的彎曲而不破損，適合個性化裝飾場景。

　　There are mainly six types of conventional thicknesses for Fumijia HPL, namely 0.35mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, and 1.0mm. The characteristics and adaptability of each thickness vary significantly, and precise selection should be made according to the needs. Among them, the 0.35mm thick Fumijia HPL has a soft texture and excellent toughness. Its biggest advantage is that it can be bent and molded, suitable for applications such as curved walls and shaped furniture veneers that require bending. Its flexibility far exceeds that of similar products, and it has been tested to achieve a bending radius of 5cm without damage, making it suitable for personalized decoration scenarios.

　　0.5mm厚度是富美家HPL中應用最廣泛的一款，占市場銷量的45%左右，核心優勢是性價比突出，兼顧實用性與經濟性。該厚度硬度適中，施工便捷，無需復雜工藝即可完成貼面、安裝，適配普通家裝、工裝的平面裝飾，如墻面、柜體、臺面貼面等，既能滿足基礎裝飾與防火需求，又能有效控制采購成本，是多數裝修項目的首選厚度。

　　The 0.5mm thickness is the most widely used HPL in Fumijia, accounting for about 45% of market sales. Its core advantage is outstanding cost-effectiveness, balancing practicality and economy. This thickness has moderate hardness and is easy to construct. It can be veneered and installed without complex processes, and is suitable for flat decoration of ordinary home decoration and fixtures, such as wall, cabinet, countertop veneers, etc. It can meet the basic decoration and fire prevention needs while effectively controlling procurement costs. It is the preferred thickness for most decoration projects.

　　對于對裝飾質感、耐用性要求較高的項目，可選擇0.6mm厚度的富美家HPL。該厚度比0.5mm更厚實，硬度提升20%，表面平整度更好，不易出現變形、起翹，適配對工藝要求較高的商業空間、高端家裝，能更好地呈現裝飾細節，提升空間格調。

　　For projects with high requirements for decorative texture and durability, a 0.6mm thick Fumijia HPL can be chosen. This thickness is thicker than 0.5mm, with a 20% increase in hardness and better surface flatness, making it less prone to deformation and warping. It is suitable for commercial spaces and high-end home decoration with high process requirements, and can better present decorative details and enhance spatial style.

　　0.7mm、0.8mm厚度的富美家HPL，硬度進一步提升，質地堅韌，最大特點是可在表面制作特殊鋼板紋理等復雜飾面。經實測，這兩種厚度的板材表面可呈現清晰的立體紋理，觸感細膩、立體感極強，硬度接近普通薄鋼板，適配高端商業空間、酒店大堂等對裝飾質感要求極高的場景，既能彰顯品質，又能發揮其防火、耐磨、易清潔的優勢。

　　The Fumeijia HPL with thicknesses of 0.7mm and 0.8mm has further improved hardness and tough texture. Its biggest feature is the ability to create complex finishes such as special steel plate textures on the surface. Through actual testing, the surfaces of these two thicknesses of boards can present clear three-dimensional textures, with delicate touch and strong three-dimensional sense. The hardness is close to that of ordinary thin steel plates, suitable for high-end commercial spaces, hotel lobbies and other scenes that require high decorative texture. It can not only demonstrate quality, but also play its advantages of fire resistance, wear resistance and easy cleaning.

　　1.0mm厚度的富美家HPL，硬度達到峰值，耐用性突出，多為甲方指定專用厚度，占高端工裝項目采購量的30%。該厚度板材不易破損、抗沖擊性強，適配醫院、學校、商場等人員密集、使用頻率高的工裝場景，能長期保持完好狀態，減少后期維護成本。

　　The 1.0mm thickness of Fumijia HPL has reached its peak hardness and outstanding durability. It is mostly designated as a special thickness by Party A and accounts for 30% of the procurement volume of high-end tooling projects. This thickness of board is not easily damaged and has strong impact resistance, making it suitable for densely populated and frequently used tooling scenarios such as hospitals, schools, and shopping malls. It can maintain a good condition for a long time and reduce maintenance costs in the later stage.

　　需要特別注意的是，當厚度超過1.0mm時，產品名稱將不再是HPL（防火皮），而是抗倍特板（俗稱康貝特板）。富美家抗倍特板厚度涵蓋2mm、2.5mm、4mm、12mm、16mm、18mm等規格，其質地更堅硬，側切面光滑，敲擊聲音清脆，雖手感類似塑料，但本質仍是紙基高壓層積制品，適配臺面、隔斷、掛墻板等需要承重、耐磨的場景，與HPL形成場景互補。

　　It should be noted that when the thickness exceeds 1.0mm, the product name will no longer be HPL (fire-resistant leather), but Anti Beite board (commonly known as Combet board). The thickness of Fumeijia anti double special board covers specifications such as 2mm, 2.5mm, 4mm, 12mm, 16mm, 18mm, etc. Its texture is harder, the side section is smooth, and the sound of knocking is crisp. Although it feels similar to plastic, its essence is still paper-based high-pressure laminated products, suitable for heavy and wear-resistant scenarios such as countertops, partitions, hanging wall panels, etc., and complements HPL scenes.

　　作為行業標桿品牌，富美家HPL憑借優質芯紙選材、精密壓制工藝，確保不同厚度的板材均具備防火、防潮、耐磨、環保的核心優勢，甲醛釋放量遠低于國標要求，適配家裝、工裝全場景。選擇富美家HPL，核心是根據應用場景、裝飾需求及甲方要求，精準匹配厚度，既不盲目追求厚款造成成本浪費，也不選擇過薄款影響使用效果。掌握以上厚度選型技巧，就能輕松避開選型誤區，讓富美家HPL發揮最大價值，兼顧裝飾質感與實用性能。

　　As a benchmark brand in the industry, Fumeijia HPL ensures that boards of different thicknesses have core advantages such as fire resistance, moisture resistance, wear resistance, and environmental protection through high-quality core paper selection and precision pressing technology. The formaldehyde emission is far below the national standard requirements, making it suitable for all scenarios of home decoration and tooling. The core of choosing Fumijia HPL is to accurately match the thickness based on the application scenario, decoration needs, and the requirements of the client. It does not blindly pursue thick styles that cause cost waste, nor does it choose thin styles that affect the effectiveness of use. By mastering the above thickness selection techniques, one can easily avoid selection errors and maximize the value of Fumijia HPL, while balancing decorative texture and practical performance.

　　本文由 富美家HPL  友情奉獻.更多有關的知識請點擊http://www.xamgdj.com/真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is contributed by Fumijia HPL Friendship For more related knowledge, please click http://www.xamgdj.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.